12MM WS2811 Flat Digital LED Pixels, DC5V Input, 50 Pcs a String

Be the first to review this product

Availability: In stock

Regular Price: $38.00

Special Price $32.50

  • Buy 10 for $29.50 each and save 10%
  • Buy 50 for $28.00 each and save 14%
  • Buy 100 for $26.50 each and save 19%

Quick Overview

12mm flat led pixel module,WS2811 IC, DC5V input, 50pcs a string; IP68 waterproof, DMX512 controllable &compatible with Madrix

12MM WS2811 Flat Digital LED Pixels, DC5V Input, 50 Pcs a String

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Voltage: DC5V
Current: 60mA
Rated  Power: 0.3W/pcs
IC Type: WS2811 IC
Luminance: 9Lm/pcs
Available  colors:Full-color 
Beam  Angle:110°-130°
Grade  of  Protection: IP68
Dimension:  25*18.5*22mm
Warranty: 2 years 

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick.

They are typically used to make outdoor signs. Compared to our other 20mm LED dots, these are diffused 8mm LEDs so they are not as bright but they color mix a little nicer. The pixels are connected by a 3-conductor cable. Red is +5V, Yellow is Ground, Green is Data and Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end. 

Each dot is digitally controlled, with an internal 5-bit PWM LED driver (15-bit color for 32,768 different shades). The pixels must be clocked by a microcontroller. The pixels use 8mm diffused RGB LEDs with brightness of about 300 mcd per individual RGB LED. 


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.