Details
IC type: APA102
Working voltage: DC5V
Pixel resolution: 14x14 pixels
Dimension: 280mm(W)*280mm(H)
Pixel pitch: 20mm
pixel Density: 2,500 dots/m2
Pixel configuration: RGB 5050 SMD with APA102C IC built-in
Ambient Temperature: - 35°C ~ + 85°C
Working humidity: ≤90 ~ 95%
Drive type: TTL SPI
Grey scale/colors: 256 levels of each color(R/G/B)/ 16.7M colors
Brightness of white balance: ≥10,000cd/m2
Pls note that this 14x14 APA102 smart RGB matrix has the same dimension as 28x28 model, but lower density of LEDs.
Unlike WS2812B LED matrix, The APA102 led matrix has 2 wires for sending data - one clock pin and one data pin. That means you need two pins, not one, to control strip. Because the clock and data is seperated, you can use any processor speed or type to control these strips. You can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers/microprocessors to control the strip. It's very easy to port the library, and you can send data to the pixels at up to 32MHz clock rate!
You may also be interested in the following product(s)
![]() 8x32 NeoPixel WS2812B Digital Intelligent Flexible LED Matrix (Panel) , DC5V Input |
![]() 16x16 NeoPixel WS2812B Digital Flexible LED Panel (Matrix), DC5V Input |
![]() 8x8 WS2812B Digital Intelligent RGB Flexible LED Matrix (Panel) , DC5V InputRegular Price: $40.00 Special Price $34.50 |
![]() 16x16 Rigid WS2812B Digital Addressable RGB LED NeoPixel Matrix, DC5V inputRegular Price: $86.00 Special Price $69.50 |