5 Conductor 12mm Strip to Wire Solderless Snap Connector

Special Price $1.35 Regular Price $1.85
In stock

No need soldering
No need wire stripping
Flame retardant
Suitable for 12mm wide 12V/24V RGBW colorplus LED strip to connect to cable AWG22-18

  • Buy 10 for $1.25 each and save 7%
  • Buy 50 for $1.15 each and save 15%
  • Buy 100 for $1.05 each and save 22%

Color: Transparent with black base
Number of Pin: 5
Conductor cross-section: 0.35 mm²~0.75 mm ( AWG22~AWG18)
Wire diameter requirement(including insulation): Φ1.5 mm~Φ 2.1mm
Wire type AWG: 18-22#
Applicable wire type: Solid wire / Stranded wire
Connection hardware: High precision brass(Cu)
Voltage range: 0-36V
Maximum current: 5A
Working Temperature: -20°~+60°C
Shell material: Polycarbonate

This type of strip to wire connector not only achieve a rapid free welding connection, but no any length requirements to the layout of wire line.You can customize required length of the cable, gauge, insulation colour and wire core type (stranded or solid) and use wires of your preference per project requirements.

How to Connect:


A1: Cut LED Strip along the cutable mark

A2: Remove 3M adhesive tape

A3: Insert LED strip and press cap down A4: Finish connection to LED Strip
B1: Insert wire into holder. (Non peeling Wire) B2: Down close cap of connector B3: Ensure cap is locked by connector base

B3: Ensure cap is locked by connector base

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!