WS2811IC Digital RGB LED Strips, Chip-built-in, 60 LED/meter, IP67 Waterproof

More Views

WS2811IC Digital RGB LED Strips, Chip-built-in, 60 LED/meter, IP67 Waterproof

Regular Price: $138.00

Special Price $105.00

  • Buy 5 for $99.00 each and save 6%
  • Buy 10 for $95.00 each and save 10%
  • Buy 20 for $89.00 each and save 16%

Availability: In stock

Based on SMD5050 RGB LEDs with integrated WS2811 control ICs, these strips manage to get 60 individually addressable LEDs in a single meter. Each LED is individually addressable, with 8 bits of red, green, and blue data shifted in for 24 bit color. IP67 waterproof, with a silicon jacket around the strip
OR
Description

Details

Input voltage: DC5V
Current: 11.5A
LED Qty: 60 SMD 5050 per meter
Wave length(NM):R-650mcd, G-520mcd,B-460mcd
Power(W/M)::14.4W/M
Signal: WS2811 chip
View angle:120 degree
Life span:no less than 50000hrs
Dimension:500*10*2.2mm
WaterProof: Non-waterproof and IP67 silicon tube (Optional)
Packaging:5M/reel in antistatic bag

Each end of the strip has JST-SM connector with 3 leads:
Green=5V DC
Red=Data/Clock
Black=Ground

There are 60 RGB LEDs per meter of this digitally-addressable type of LED strip, and you can control each LED individually!  You can set the color of each LED's red, green and blue component with 8-bit PWM precision. The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs.

These WS2811 digital intelligent led strips run on 5V DC so are better for short runs or with several feeds as voltage drop can be a problem on long runs. Pls click here to check our 5V power supplies. 

To Power a full roll of strip, You must use 5V power supply, do not use higher than 6V or you will destroy the entire strip.



Reviews