T3-CV Wireless LED Sync Receiver

More Views

T3-CV Wireless LED Sync Receiver

Regular Price: $75.00

Special Price $69.50

  • Buy 3 for $65.00 each and save 7%
  • Buy 5 for $61.50 each and save 12%
  • Buy 10 for $57.50 each and save 18%

Availability: In stock

Note: T3-CV cann't work as stand-alone unit, You need to buy WiFI-103 , T1 Dimmer remoteT2M remote controller,  or T3 Remote controller to complete the control system. 



Input voltage: DC5V-DC24V
Max current load: 6A×3CH Max Class 2 (5A)
Max output power: 75W/180W (12V/24V)
Compatible remote control: T1/T2M/T3X
Remote Distance: 25m
Working temperature: -20°C~40°C
Dimension: L175 × W44 × H30mm


  • With either remote, an unlimited number of receivers can be controlled within each zone. Simplify your installation and eliminate wires by using multiple receivers.
  • Using the remote, save favorite settings to a memory function and restore them with the push of a button.
  • 6 amps per channel maximum load.
  • Indicator light on remote displays current color of RGB lighting and blinks to confirm commands.
  • Power off memory function.
  • Radio frequency remote control works through walls with effective range of up to 100 feet. You do not need to connect the wireless receivers to each other or the remote control. Just connect your lights to the wireless receivers. 

T3-CV RGB LED Receiver can control RGB LED Flex Strips of either 12 or 24VDC. A number of T3-CV’s can be used simultaneously so as to have multiple rolls RGB LED Flex Strips in the same setup.

It is important to note that to control all of the T3-CV’s and get them to all to the same thing at the same time, you will need a controller of some kind. To do this you will need to use either a T3-5A RGB LED Controller or the T3 RGB LED Remote Control. If you are using the T3 Remote Control just pair the T3 Remote Control with each and every T3-CV.


T3-CV Wiring Diagram: 


You may also be interested in the following product(s)