12*25mm Side View Dome Flex Neon Sleeve for 12mm Wide LED Strips, Horizontal Bending
Accepts 12mm or less wide led strip lighting
Dome emission surface with 270-degree beam angle.
Soft, flexible, easy modeling and tensile resistance
Professional structure design, uniform soft light, no spots, consistent color temperature.
Sold by the 5 meter, 3 meter, 2 meter, and 1 meter segments.
*Ribbon not included, simply pull your LED strips inside this diffuser using the pull string that is already within the extrusion.
LED Strip Compatibility: up to 12mm wide
Sleeve Width: 12mm / 0.47in
Sleeve height: 25mm / 0.98in
Beam Angle: 270°
IP Grade: IP67
Operating Temperature: -20 to 50°C
Accessories per Meter Included: 1x End Cap (with Hole), 1x End Cap (with no hole), 3 x Mounting Clips & Screws
Our Flexible Neon Sleeve allows you to pull any of our single width ribbons into it, giving excellent soft and flexible lighting strips. Included with every roll are some mounting brackets and end caps.
An inner and outer silicone diffusion layer keeps the extrusion extremely flexible while giving an excellent diffused light. You can seal the silicone diffusion with standard clear silicone.
All our neon diffusing Sleeves can ONLY be used for 5-24V DC input LED Strips. And the recommended maximum power of strip light is 20 W/m to avoid overheating.