12mm Diffused Flat Digital RGB LED Pixels, WS2811/UCS1903, DC 5V, Strand of 50
- Buy 10 for $35.50 each and save 5%
- Buy 50 for $29.50 each and save 21%
- Buy 100 for $27.50 each and save 27%
Voltage: DC5V
Maximum current draw: 60mA each pixel
Rated Power: 0.3W/pcs
IC Type: WS2811 /UCS1903 (same protocol) IC
Available colors: full-color
Beam Angle:140°
Grade of Protection: IP68
Dimension: 12mm diameter (0.45") 23mm deep (0.9")
Wire Gauge: 20AWG, 10cm apart on the strand
Warranty: 2 years
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick.
Each dot is digitally controlled, with an internal 5-bit PWM LED driver. The pixels must be clocked by a microcontroller. The pixels use 8mm diffused RGB LEDs with brightness of about 300 mcd per individual RGB LED.
