12V 12mm Diffused Bullet Digital RGB LED Pixels, WS2811/GS8208, Strand of 100
12V bullet-type 12mm diameter pixels, each strand has 100 pixels in series!
WS2811, GS8208 (dual data signal lines, similar protocol to WS2811) pixel control chips optional
Waterproof IP68 can work outdoor project
Cable length is 4" spaced (10cm)
Need cable length custom? Contact us!
- Buy 10 for $69.50 each and save 8%
- Buy 50 for $65.50 each and save 13%
- Buy 100 for $59.50 each and save 21%
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are waterproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick.
Working Voltage: 12V DC
Current consumption: ~.25W/.022A
Clip into a 12mm drilled hole
Maximum diameter of node: 12mm / .47"
Length of node body: 30mm / 1.21"
Overall length of node and LED: 1.46"
Total LED nodes per string: 50/100
Pixel protocol:
WS2811 (three wires, supported by every major pixel controller)
GS8208 (four wires, dual data signal lines, similar protocol to WS2811)
Brightness level: 256 level
Emitting Color: RGB
LED view angle: 120 degree
Waterproof IP grade:IP68
Wire: BLACK 18AWG 4 INCH
