15*5mm Top View Flex Neon Sleeve for 12mm Wide LED Strips, Vertical Bending
Accepts 12mm or less wide led strip lighting.
Top flat Style with 120-degree beam angle.
Two types of diffuser covers available, Clear, and frosted which spread the light more evenly and eliminates the harshness of light glare, but you’ll still see the diode hot spots coming through the diffuser when the light is on.
For longer lengths, Please contact us direclty.
*Ribbon not included, simply pull your LED strips inside this diffuser using the pull string that is already within the extrusion.
LED Strip Compatibility: up to 12mm wide
Sleeve Width: 15mm / 0.59in
Sleeve height: 5mm / 0.2in
Beam Angle: 120°
IP Grade: IP67
Operating Temperature: -20 to 50°C
Accessories per Meter Included: 1x End Cap (with Hole), 1x End Cap (with no hole), 3 x Mounting Clips & Screws
Our Flexible strip sleeve allows you to pull any of our single width ribbons into it, giving excellent soft and flexible lighting strips. We recommend to use high density LED strip lights to create incredibly smooth and visually appealing light features.
When cut these housing tube, please pay close attention to cut it straight. Or to use special scissors. If the cut section is not flat, it will affect the seal with end caps. Except the mounting clips included in the package, you can also use Glue or Adhesive Tapes to mount the Neon Light sleeve.
There is a rope in the silicone channel, just tie a string around the led strip and pull the led strip through the channel. Please read the installation instructions carefully before operation, to help you get it done efficiently and smoothly.