16CH RGBW 4 Group DMX/RDM LED Decoder, 12-24VDC, 3A/CH, XLR-5, RJ45 Socket
This driver is able to accept 12-24VDC at 3A per channel (16 channels total) for max load of 576W/12V, or 1152W/24V.
4 kinds of mode optional: single color, color temperature, RGB, RGBW.
With RDM remote management protocol, the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting, equipment recognition, etc.
16bit (65536 levels) / 8bit (256 levels) grey level optional
Easy operation with OLED screen and touch buttons
With multiple kinds of DMX in/out ports: RJ 45, 5pin XLR, pluggable terminal blocks.
This DMX Decoder converts the universal standard DMX512 signal into PWM signal to drive LEDs. this decoder work with DMX512 Console, equiped with DMX standard XRL-5, RJ45 interface, easy to operate. And it can control single color, two color, RGB, RGBW LED light.
Input Voltage: 12 ~ 24V DC
Output Voltage: 12 ~ 24 V DC
Output Current (mA) max/output: 3000
Output Current Max. (A): 48
Output Power (W): 1152W @ 24V
LED Outputs: 16
Lighting Color Range: RGBW
Control: Output Signal: PWM-CV
Control: DMX
RDM Support: Yes
Dimming Range: 0~100%
Driver Configuration: Digital
Number of Channels: 16
Environmental: Operating Temperature: -30 ~ +65 °C
Ingress Protection: IP20
Environment: Indoor
Demension: 180*122*39 mm
Wiring diagram
