24-18 AWG Single/Two Wire Snap Splice Connectors, Pack of 10
- Buy 5 for $5.55 each and save 7%
- Buy 10 for $5.25 each and save 12%
- Buy 50 for $4.95 each and save 17%
Type: Terminal Splice Tap
Max Amperage: 9A
Rated Voltage: 300v
Peak Voltage: 2.5kV
Size: 7*25*6.6mm(single channel), 10.4*25*6.6mm(dual channel)
Gauge: 18 /20 /22 /24
Connector Shape: I
Housing material: Polycarbonate
Use 1/2 wire connectors to easily splice wires without stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
To use this connector:
1. Open the top and bottom of the connector
2. Prepare wires to be inserted into both sides of the connector by cutting it flush with the wire casing. You do not need exposed copper to use this connector
3. Insert wire into the connector and make sure that the wire is pushed all the way to the back of the connector (critical step)
4. Once you have confirmed that the wire has been pushed all the way to the back and is lined up correctly press the connector tray down with pliers to secure the connection
Note: Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.