28x28 Digital Addressable APA102 Flexible LED Matrix Board, 5V
- Buy 5 for $189.50 each and save 4%
- Buy 10 for $179.50 each and save 9%
- Buy 20 for $169.50 each and save 14%
IC type: APA102
Working voltage: DC5V
Max power consumption: 180watt
Pixel resolution: 28x28 pixels
Dimension: 280mm(W)*280mm(H)
Pixel pitch: 10mm
pixel Density: 10,000 dots/m2
Pixel configuration: RGB 5050 SMD with APA102C IC built-in
Ambient Temperature: - 35°C ~ + 85°C
Working humidity: ≤90 ~ 95%
Drive type: TTL SPI
Grey scale/colors: 256 levels of each color(R/G/B)/ 16.7M colors
Brightness of white balance: ≥10,000cd/m2
Unlike WS2812B LED matrix, The APA102 led matrix has 2 wires for sending data - one clock pin and one data pin. That means you need two pins, not one, to control strip. Because the clock and data is seperated, you can use any processor speed or type to control these strips. You can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers/microprocessors to control the strip. It's very easy to port the library, and you can send data to the pixels at up to 32MHz clock rate!
