30 Channel Easy DMX512 LED RGB Controller, 1A/CH, DC 7V- 24V
30 output channels, can connect with single or RGB lamps
0-100% dimming output, each channel 256 gray levels
International standard DMX512 input protocol, address code set by DIP switches
Wide voltage DC input DC9V ~ DC24V
Each occupied by 30 DMX address
16 kinds of test patterns, 16 levels for rate of change
Input Power: DC9V-DC24V
Maximum load current: 1A/CH×30
Maximum power load: 360W (12V) 720W (24V)
Output gray level: 256
Input Signal: DMX512/1990
Output signal: 30 channels Constant PWM
Output DMX : 30 channels
standard XLR-3 caron plug
Size: L225*W80*H32
Gross Weight: 320g
Click here to check the detailed manual of this 30 CH easy DMX512 controller
Installation Notes:
1 This kind of controller works only under DC9V-24V, which is provided by the matched controllable main power, or else the controller will be damaged.
2 The UTP wire is connected hand in hand to make the cable, when two or more controller connected.
3 The power supply should be off when connecting the electric wires, and it can be turned on till making sure the wires are connected correctly and the indicator of main power in red is lighting.
4 Controller should work under the environment of adequately ventilated, dry, not corroded, no flammable gas and rust.
5 Please check the wires connection regularly so that the wires of aged, rust-eaten, and damaged insulation spacer can be replaced timely.