30W White DMX Fiber Optic LED Illuminator w/ Remote
Input Voltage: AC 100-240V
Light Source: White light LED, 24W, Cree, 3000K/6000K White
Control: Remote control/Buttons and display/DMX512
Dimmable
No fans or motors, noise free
DMX512 protocol: DMX512 console or master-slave control
Maximum fiber tail capacity: 1250pcs of 0.75mm
Three ferrule reducers are included: 28mm, 24mm and 20mm openings
View the user manual for all technical details
Multiple units of the DMX512 light engines can be connected as a group via DMX signal cables to run the master-slave control mode. In master-slave control mode, there will be one and only one master light engine, and all the rest will be set as slave machines. The master runs the built-in program with or without the remote control, and all slave machines will automatically follow to have a synchronous or progressive effect.
3 DMX Channels:
1. CH1: Dimming,
2. CH2: Brightness change speed,
3. CH3: Strobe.
The light engine has 6 built-in programs which could be realized by the buttons and display on the back panel of the light engine.
The 4-key RF remote control has an effective control distance of around 25 metres in open area. The function of the 4-key remote control:
1. Turn on the light engine,
2. Turn off the light engine,
3. Fix the emitting color,
4. Dimming.
Battery: 23A 12V, 1pc (not included in the package).
