Flicker Free 5 Channel RGBWA DMX512 Decoder, 12-24VDC, 8A/CH, RJ45, 5-pin XLR in/out Ports
5 Channel RGBWA DMX512 Decoder, 12-24VDC, 8A/CH
DMX 512 RDM decoder, RDM function can inter-communicate between DMX master and decoder
Multiple DMX in/out ports: RJ 45, XLR , normal screws
Total 5 PWM output channels, common anode. Adjustable DMX channel quantity from 1CH~5CH
Adjustable PWM output resolution ratio 8bit , 16bit
Adjustable output PWM frequency from 500HZ ~ 30K HZ
Adjustable output dimming curve gamma value from 0.1 ~ 9.9
- Buy 5 for $75.50 each and save 5%
- Buy 10 for $72.50 each and save 9%
- Buy 30 for $69.50 each and save 13%
Input voltage: 12V – 24V DC (Use only with Class 2 regulated Power Supply)
Output: 5 Channels
External dimension: L164 x W73 x H38 mm (6.45″ x 2.87″ x 1.49″)
Output current: 5 x 8A
Output power: 5 x (96~288)W
Certifications: CE, cRUus, rohs, FCC
Operating temperature: -20°C~40°C (-4°F~104°F ) Indoor (dry location)
This RGBWA DMX Decoder is a highly configurable 5-channel DMX decoder with a digital display. The display allows the setup of DMX addresses without a DIP switch and can be used to change the PWM frequency and dimming curve to suit your specific application. This decoder allows for easier and faster connection, higher load capacities, and includes an adjustable pulse width modulation technology. Choose a PWM frequency between 500 to 30,000 hertz to display a flicker-free output of light to studio equipment. The DMX Decoder RGBWA also supports an 8-bit or 16-bit gray scale control on the output channels. The decoder takes the DMX output from any standard DMX console or controller, and decodes the signal so you can drive 4, 5 or 6 wires of LEDs like Red-Green-Blue and White Adjustable lights together.
Important note: The maximum length of RGB/W LED Flex Strip attached to DMX Decoder should not exceed 20 linear feet (due to voltage drop resulting in color loss).
Click here to check the detailed manual of this RJ45 4CH DMX512 decoder
Wiring diagram
