5 Conductor 12mm Strip to Wire Solderless Snap Connector
No need soldering
No need wire stripping
Flame retardant
Suitable for both RGB+White and RGBW 4-in-1 strip to connect to cable AWG22-18
For B2B or Large Quantity Price Info, Please email us.
- Buy 10 for $1.25 each and save 7%
- Buy 50 for $1.15 each and save 15%
- Buy 100 for $1.05 each and save 22%
Color: Transparent with black base
Number of Pin: 5
Conductor cross-section: 0.35 mm²~0.75 mm ( AWG22~AWG18)
Wire diameter requirement(including insulation): Φ1.5 mm~Φ 2.1mm
Wire type AWG: 18-22#
Applicable wire type: Solid wire / Stranded wire
Connection hardware: High precision brass(Cu)
Voltage range: 0-36V
Maximum current: 5A
Working Temperature: -20°~+60°C
Shell material: Polycarbonate
This type of strip to wire connector not only achieve a rapid free welding connection, but no any length requirements to the layout of wire line.You can customize required length of the cable, gauge, insulation colour and wire core type (stranded or solid) and use wires of your preference per project requirements.
How to Connect:
![]() |
![]() |
![]() |
![]() |
A1: Cut LED Strip along the cutable mark |
A2: Remove 3M adhesive tape |
A3: Insert LED strip and press cap down | A4: Finish connection to LED Strip |
![]() |
![]() |
![]() |
![]() |
B1: Insert wire into holder. (Non peeling Wire) | B2: Down close cap of connector | B3: Ensure cap is locked by connector base |
B3: Ensure cap is locked by connector base |