50mm WS2811 RGB Pixel Bulb Light Strand, DC 12V, Strand of 30
50mm diameter balls, Pixels utilize WS2811 chip for full 24 bit color
12VDC input, 0.72W maximum per pixel (LED on full white)
UV resist milky Acrylic ball. Environment friendly, no harsh glare and buzzing noise, no flicker.
SPI signal is in parallel connection, avoiding all lights influenced by the failure of one light in serial connection
30 pcs pixel ball in a 9 meter strand, which can be custom if needed. For custom, contact us directly.
- Buy 5 for $179.50 each and save 5%
- Buy 10 for $169.50 each and save 11%
- Buy 30 for $159.50 each and save 16%
- Buy 50 for $149.50 each and save 21%
Input Voltage: DC12V
Max Power: 0.72W/pcs
Emitting Color: RGB
IC Type: WS2811 (datasheet)
LED Qty: 3 pcs 5050 SMD RGB LED each bulb
Bulb Dimension: 50mm diameter bulb base:50mm*85mm
Standard connection: 30pcs per strand
Spacing:28cm (11 inch)
Housing: milky Acrylic,UV resist
Rating: IP66
Lifespan: 40000 hours
Certification: CE and RoHS
Each pixel bulb contains three 5050 RGB LEDs along with a dedicated WS2811 controller chip. This RGB pixel bulb strand is connected by a 3-conductor waterproof connector cable. Data is shifted down from one pixel to the next . The wires carry the following signals: +12V, Gnd, Data.
