6 Channel DMX Decoder, 10A/Ch, RJ45 /XLR, 8Bit/16Bit Switchable
8bit/16bit option, 500Hz/5000Hz frequency option, Signal isolation, DMX signal amplifier, full-color with driver control
Output 6 channels, single channel max 10A output drive,total output is less than 60 A
With dip switch to set DMX address freely.
Strong anti - interference ability ,humanized terminal design.
- Buy 5 for $74.50 each and save 6%
- Buy 10 for $69.50 each and save 13%
- Buy 30 for $64.50 each and save 19%
Input Voltage: DC12-24V
Output Current: 10A*6CH Max 60A
Control Channels: 6CH
Light Gray Level: 8Bit/16Bit
Signal Input: DMX512 digital signal
Input/output Socket: RJ45 and available 3-pin or 5-pin XLR
Frequence: 500Hz/5000Hz
Work Temp: -30~70℃
Protection Grade: IP40
Gross Weight: 400g
Product Size: L122*W107*H33(mm)
This 6 Channel DMX Decoders are high-capacity decoders that accommodate up to 6 output channels of LED lighting. Each decoder is equipped with RJ45 and available 3-pin or 5-pin XLR DMX ports for multiple connectivity options. Each decoder takes the DMX output from any standard DMX console or controller, and decodes the signal so you can drive up to 6 channels of LEDs, such as 6-in-1 ColorPlus LED Strip Light or two separate runs of RGB. The switchable PWM frequency up to 5000Hz. It is compatible with both 12 and 24 VDC LED lighting.