8 x WS2812B Digital 5050 RGB LED Pixel Ring

8 x WS2812B Digital 5050 RGB LED Pixel Ring

8 x WS2812B Digital 5050 RGB LED Pixel Ring

Special Price $5.55 Regular Price $7.00
In stock

Each PCB contains 8 WS2812B digital addressable RGB LEDs
Working voltage: 4 to 7V DC
Outer Diameter: 28 mm
Inside Diameter: 16 mm

  • Buy 10 for $4.95 each and save 11%
  • Buy 30 for $4.55 each and save 18%
  • Buy 50 for $3.95 each and save 29%

Each pixel can realize 256 highlighted, complete 16777216 colors of all true color display.The WS2812B are each addressable as the driver chip is located inside the LED. They're tiny but well worth the effort! Thanks to the constant current drive (18mA) the brightness doesn't change with voltage. Simply wire your power supply positive line (4~7V DC) to Vcc, GND to GND and also GND on your control board - and the data pin from your control board to "In". If you are chaining the boards together, be sure to connect "OUT" on the first board to "IN" on the second - and so on.

Each board is equipped with a single data line with a very timing-specific protocol requiring a real-time microconroller with a 8MHz or faster processor such as an AVR, Arduino, PIC, mbed, etc. There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces. 

More information:
WS2812B datasheet
FastLED Arduino library
Using with Raspberry Pi

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account