Clear Clamp on Solderless COB LED Strip Connectors, 2/3/4 Conductor 5/8/10mm Wide Available
Transparent, tough and safe, which can make your light strips more awesome in reducing the dark area.
No welding, easy for installation.
Create tight and secure connection
ONLY work with COB LED strips, and can't work for SMD LED strips
Working Voltage: DC5~24V
Max Current: 4A
Pin NO.: 2/3/4 Pins
PCB Thickness: 0.25~0.35mm
IP Rating: IP20
Materials: Polycarbonate, Cop
Housing Colour: Transparent
Temp. Resistance: 105℃
Environmental Working Temp.: -10 ~ 45℃
With the COB LED strip connector you can connect a cut piece of LED strip without having to solder it.
How to use this connector:
1). Insert each end of the LED strips into the end of the connector, making sure the metal clip is on the same side as the metal solder pad of the LED strip.
2). After completing the insertion, also check that both ends of the LED strips are tightly connected.
3). Push the metal clip down with the correct force using pliers to ensure the metal clip does not slip is placed in the correct position and connection completed.
