Digital RGB/RGBW SPI Controller w/ RF Remote
digital display
6 IC series, control pixel quantity settable, support RGB/RGBW pixel strips.
32 different pre-programmed dynamic color change effects
Brightness, speed and direction adjustable
Multiple receivers can be paired to one remote
Working voltage: DC5V-DC24V
Output current: Max 10A
Output power distance: 50W(5V)/120W(12V)/240W(24V)
Remote control: 30-50m
Dimension: L135 X W30 X H20(mm)
The 32 different effects are pre-programmed and the RF remote can be used to modify speed, brightness and direction. Multiple effects can be linked to cycle through in a specified order and you can save favorite scenes into two memory slots. With Power-Off memory, it will return to the last setting when powered back on. This controller supports addressing for 8-1020 pixels and can be configured for any number in between. It can handle up to 10A of current at 5, 12 or 24V DC. For higher current applications, power the LEDs directly to bypass the 10A limit and use the control signal from the receiver.
Click here to check the manual of this digital RGB/RGBW SPI Pixel Controller
