RGB LED Controller with Wireless RF Touch Color Remote, 8 A/CH, 12-24V DC
Compatible with RGB color changing LED light strips that operate with in a 12-24V DC range. You can choose from 29 dynamic color-changing modes with adjustable speed and brightness levels.
- Buy 5 for $36.50 each and save 8%
- Buy 10 for $32.50 each and save 18%
- Buy 30 for $29.50 each and save 25%
Voltage: 12-24 VDC
Amps Per Channel: 8 Amps/CH
Amps: 24 Amps
Number of Channels: 3 Channels
Radio Frequency: 433.92 MHz
Remote Range: Up to 65.6 ft (20 m)
Battery Type: AAA (x3 not included)
Control Type: Handheld (RF) Remote
Ambient Operating Temperature: -40 to 60 °C (-40 to 140 °F)
Use this RGB LED controller with wireless touch-color RF remote to control your RGB LED light strips. Choose from 29 dynamic color-changing modes with adjustable speed and brightness levels or from static color and white modes with adjustable brightness levels, and control your light strip from up to 65' away. The remote is completely touch activated with a color wheel for direct, fine-tuned color selection. The remote also has power, pause, brightness control, dynamic mode selection, and speed-selection touch buttons. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The polarity-sensitive controller has a maximum load capacity of 8 amps per red, green, or blue channel and is compatible with LED light strips that operate with in a 12-24V DC range. Red and green lights on the controller let you see when it is receiving power and signal from the RF remote. Screw slots allow for permanent controller mounting.
