T1000S SD Card SPI Controller for Digital RGB LED Strips, 5V-24V Input
32—256 Gray, Gamma correction procession software
Support the rules and special-shaped handle.
Single-port output, can support 1024/2048 lights
Off-line control, play back content stored in the SD card
Store a maximum of 16 documents, copy multiple files to the SD card in order
Support LPD6803,D705,1101,6909,6912; LPD8806,LPD8809; TM1803,TM1804,TM1809,TM1812; WS2801,WS2803;TLS3001 IC chips
The playback speed of up to 30 frames / sec, the port more than 512 lights, the frame rate with the increase in the number of lights automatically reduced.
Display files naming: when placing one file, copy the software-generated display file to the formatted SD card, when placing multiple files should be named as “00led”,”01led”,”02led”…(00means the first display file, 01means the second, and so on).
Click here to check the manual of this SD card digital LED strip controller
Click here to download the latest LED editor software and its operating manual
Screen printing definition ：
|
7.5-24V |
DC power input, to provide two sets of power input, select a group can be. |
|
5V |
|
|
GND |
Power Ground |
|
ERROR |
Error indicator |
|
POWER |
Power LED |
|
SD CARD |
SD card slot |
|
CLK |
Output signal CLK |
|
DAT |
Output signal DATA |
|
GND |
Signal ground |
|
B |
Compatible with DMX，differential A（DAT+)，and differential B（DAT-)。 |
|
A |
|
|
GND |
Signal ground |
Regulatory function button：
|
SET |
Save Settings to save current settings file and the playback speed |
|
MODE |
Switch File |
|
SPEED+ |
Speed up the playback speed |
|
SPEED- |
Slow down the playback speed |
