Super Tiny SK6812 EC3210 RGB LED, Chip-Built-in, 100 Pack
3.2mm x 1.0mm x 1.48mm, Control circuit and the RGB chip in EC3210 component. Two version available. SK6812 EC3210R, and SK6812 EC3210F.
We have them straight off the factory floor in full reels of 5,000 LEDs packed in the aluminum envelop. If you are the person who needs that many, we highly recommend to buy them by reels to keep moisture to the minimum. Ordering 50 packs (5,000 LEDs) at a time, you will get a whole reel.
- Buy 10 for $15.55 each and save 13%
- Buy 50 for $13.55 each and save 25%
- Buy 100 for $12.95 each and save 28%
- Buy 500 for $11.95 each and save 33%
SK6812 EC3210 is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 3210 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
The data protocol being used is unipolar RZ communication mode. The 24-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed.
The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.
Mechanical Dimensions:
