SK6812 RGBW Digital Addressable LED Mini PCB, DC5V Input, Sheet of 100
Each PCB contains one A-quality SK2812 built-in 4-in-1 RGBW 5050 LED. PCB is roughly circuiar in shape with diameter of around 10mm. Dimensions can vary slightly (+/- 1mm) depending on the PCB assembler
SK6812RGBW is a smart LED control circuit and light emitting circuit in one controlled LED source,which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
The data protocol being used is unipolar NRZ communication mode. The 32-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed.
The LED has a low driving voltage (which allows for environmental protection and energy saving),high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.
- 16 x SK6812 RGBW 5050 Smart LED Pixel RingSpecial Price $9.50 Regular Price $12.00
- 144 LED/m SK6812 4 in 1 RGBW Digital Addressable LED Strip, 5VDCSpecial Price $34.50 Regular Price $41.00
- WS2812B/SK6812 Digital RGB LED Mini PCB with Heatsink, 10mm Diameter, DC 5V, Sheet of 100Special Price $39.50 Regular Price $60.00
- SK6812 4 In 1 RGBW Digital Addressable LED Strip, 60/m, 5V, 5m ReelSpecial Price $89.50 Regular Price $115.00