SP107E Bluetooth LED Music Controller for Digital Strips
Long distance APP remote control via Bluetooth
Support almost every kind of one-wire or two-wires LED driver IC
Support setting pixel number and segment number, support up to 960 pixels
With 18 kinds of LED strip music effects, 30 kinds of LED matrix music effects, and 180 kinds of non-music effects
DC5V~24V wide range working voltage, reverse power supply input protection
User setting saving
Working temperature: 20℃~60℃
Working Voltage: DC5V~24V
Working Current: 18mA~45mA
Remote distance: 20 Meters
Product size: 85mm*45mm*22mm
Product weight: 40g
Certificates: CE, RoHS
APP Operations:
1. Search”LedShop” in App Store or Google pay or scan this QR code to download and install the App:
2. Make sure you have turned on Bluetooth on your phone;
3. Open the APP, drag to refresh the device list, select device name “SP107E” to connect the controller, once connected you will able to rename your controller;
4. Select RGB order and IC type;
5. Adjust the pixel number;
6.Press ENTER.
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN, and Build-IN microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source(MP3, Phone or tablet…)and the speaker(or headset), the controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, the controller will automatically switch into microphone input mode.
