2 Conductor 5mm Wide Strip to Wire Clamp on Solderless Connector
Designed for 5mm wide non-waterproof single color light LED strip
The workable LED quantity is from 30LEDs to 120LEDs per meter.
No need soldering
No need wire stripping
Suitable for 5mm PCB strip to connect to cable AWG22-18
For B2B or Large Quantity Price Info, Please email us.
- Buy 10 for $0.75 each and save 12%
- Buy 50 for $0.65 each and save 24%
- Buy 100 for $0.55 each and save 35%
Color: Transparent with black base
Number of Pin: 2
Conductor cross-section: 0.35 mm²~0.75 mm ( AWG22~AWG18)
Wire diameter requirement(including insulation): Φ1.5 mm~Φ 2.1mm
Wire type AWG: 18-22#
Applicable wire type: Solid wire / Stranded wire
Connection hardware: High precision brass(Cu)
Voltage range: 0-36V
Maximum current: 5A
Working Temperature: -20°~+60°C
Shell material: Polycarbonate
This type of strip to wire connector not only achieve a rapid free welding connection, but no any length requirements to the layout of wire line.You can customize required length of the cable, gauge, insulation colour and wire core type (stranded or solid) and use wires of your preference per project requirements.
How to connect:
![]() |
![]() |
![]() |
![]() |
A1: Cut LED Strip along the cutable mark |
A2: Remove 3M adhesive tape |
A3: Insert LED strip and press cap down | A4: Finish connection to LED Strip |
![]() |
![]() |
![]() |
![]() |
B1: Insert wire into holder. (Non peeling Wire) | B2: Down close cap of connector | B3: Ensure cap is locked by connector base |
B3: Ensure cap is locked by connector base |