Tunable White LED Controller with Wireless RF Touch Color Remote
12-24V, Up to 144W per channel
Works with all tuneable white strips
Choose your own brightness levels and color temperatures
With a RF touch Remote (radio frequency)
- Buy 5 for $36.50 each and save 8%
- Buy 10 for $33.50 each and save 15%
- Buy 30 for $29.50 each and save 25%
- Buy 50 for $27.50 each and save 30%
Voltage: 12-24 VDC
Amps Per Channel: 6 Amps/CH
Control Type: Handheld (RF) Remote
Finish: Black
Input Connection Type: Screw Terminal
Number of Channels: 2 Channels
Radio Frequency: 433.92 MHz
Remote Range: Up to 65.6 ft (20 m)
Working temperature: -20 to 60 Degrees Celsius (-4 to 140 degrees Fahrenheit)
Use this tunable color temperature LED controller with wireless touch-color RF remote to control your tunable white LED light strips. The remote is completely touch activated with a temperature control wheel for direct, fine-tuned white color temperature selection. The touch-color remote also has power, brightness control, and cool/warm white selection touch buttons and can control your LED light strips from up to 65' away. Power-cycle mode retention allows your light strips to return to the mode that was selected before it was powered off. The polarity-sensitive controller has 2 channels with a maximum load capacity of 6 amps per channel and is compatible with LED light strips that operate with in a 12-24V DC range. Red and green lights on the controller let you see when it is receiving power and signal from the RF remote. Screw slots allow for permanent controller mounting. Remote requires 3 AAA batteries (not included).
