V1 1-Channel Single Color LED Dimming Controller, 8A, 5-36VDC, Push-Dim
Designed for monochrome lighting, e.g. single-colour LED strips
Supply voltage range 5-36V DC
Maximum output current 8A
Possibility of controlling one lighting zone
Radio communication with a range of up to 30 metres (can be increased by autotransmission)
PUSH dimming (external contactor e.g. bell button)
Up to 10 transmitting devices such as remote controls or LED wall-mounted panels can be assigned
Compatible with Wi-Fi after purchase of the appropriate module
Thanks to PWM, stepless brightness control from 0-100% (4096 dimming levels)
View the Dimmer User Manual (PDF)
- Buy 5 for $25.50 each and save 7%
- Buy 10 for $23.50 each and save 15%
- Buy 30 for $19.50 each and save 29%
Input Voltage: DC5-36V
Input Current: 8.5A
Output Voltage: DC5-36V
Output Current: 1CH, 8A
Output Power: 40W@5V, 96W@12V, 192W@24V, 288W@36V
Output Type: Constant Voltage
Input Signal: RF 2.4GHz+Push Dim
Control Distance: 30M
Dimming Level: 4096 (2^12) Levels
Dimming Range: 0-100%
Dimming Curve: Logarithmic
PWM Frequency: 2000Hz (Default)
Working Temperature: -30°C to +55°C
Case Temperature: Max. +85°C
IP Rating: IP20
Dimension: 97(L)x33(W)x18(H)mm
1-channel controller designed for dimming single-color LED light sources and compatible with remote controls . One V1 driver accepts 10 remote controls. It is equipped with an auto-transmission function, where one controller transmits a signal to another controller 30 meters away. In combination with an external push button, the functions of dimming 0-100% and on / off can also be realized. The device has protection against overheating, overload and short circuit. A typical connection diagram is shown in the figure below.
