75mm WS2801 Digital RGB LED Bars, DC12V, Strand of 20
78x18x6mm (LxWxH)
75mm / 3" apart on the strand
Pixels utilize WS2801 chip for full 24 bit color
12VDC input, 0.72W maximum per pixel (LED on full white) 2-pin SPI-like protocol
Each strand has 20 pixels in series! Each strand has two JST SM 4-pin connectors
- Buy 10 for $42.50 each and save 7%
- Buy 50 for $39.50 each and save 13%
- Buy 100 for $35.50 each and save 22%
Working Voltage: DC12V
LED QTY: 3leds/pixel
LED Type: SMD5050 RGB
IC type:WS2801IC
Waterproof IP grade:IP67
Emitting Color: RGB
Power Consumption: Max 0.72W/pcs
Brightness Level: 256 level
Click here to download the datasheet for the WS2801
Each pixel contains three 5050 RGB LEDs along with a dedicated WS2801 controller chip. All of the LEDs are controlled at once so you cannot have one pixel with the three LEDs different colors. (Color control is per single rectangular 3-LED pixel only) The total max brightness of all LEDs is about 4500mcd.
This RGB pixel strand is connected by a 4-conductor cable. Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end. The four connection wires carry the following signals: +12V , Gnd , Data and Clock .
Pixels are digitally controlled, with an internal 8-bit PWM LED driver (24-bit color for 16 million different shades). Pixels must be clocked by a microcontroller, or other control devices. There are many examples around the web available showing simple connections and code for the Arduino as well as other microcontrollers.