WS2811 Digital RGB LED Strip,  90/m,  12V, 5m Reel

WS2811 Digital RGB LED Strip, 90/m, 12V, 5m Reel

WS2811 Digital RGB LED Strip, 90/m, 12V, 5m Reel

Special Price $119.50 Regular Price $138.00
In stock

Supplied in 5 meter (16.4ft) reels
3 common-anode RGB LEDs per segment, individually controllable
Comes with female/male 3-pin JST SM connector on each end

  • Buy 5 for $109.50 each and save 8%
  • Buy 10 for $105.50 each and save 12%
  • Buy 20 for $99.00 each and save 17%

Input voltage: DC12V 
Power consumption: 24W/m max
IC Qty: 30 pcs WS2811 IC per meter
LED Qty: 90 pcs 5050 SMD LED per meter
Color: Full Color RGB
PCB Size: L5000*W15(mm)
View angle: 120°
Light source: Epistar 5050 SMD LEDs
LED wavelengths: 630nm/530nm/475nm
Protection rate: Non-waterproof  or IP67 waterproof (sealed in silicone tube)
FPCB color: white

There are 90 RGB LEDs per meter, and you can control each 3-LED segment individually!  You can set the color of each LED's red, green and blue component with 8-bit PWM precision. The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs.

These WS2811 digital intelligent led strips run on 5V DC so are better for short runs or with several feeds as voltage drop can be a problem on long runs. Pls click here to check our 12V power supplies. 


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!