WS2815 12V Digital Addressable RGB LED Strip, Dual Data Signals, 144/m, 60/m, 30/m Available

WS2815 12V Digital Addressable RGB LED Strip, Dual Data Signals, 144/m, 60/m, 30/m Available

WS2815 12V Digital Addressable RGB LED Strip, Dual Data Signals, 144/m, 60/m, 30/m Available

Special Price $36.50 Regular Price $42.00
In stock
SKU
LLH-2815-12V
Overview
12V DC input, can effectively reduce the operating current of the pixel LED, and decrease the voltage-drop of the PCB, Dual-signal wires version, signal break-point continuous transmission, individually controllable.

Working Voltage: 12V DC
LED Density: 30, 60,144leds/Meter Available
Light Source: A-quality WS2815B/SK6813HV RGB 5050 LED
Pixels : 30, 60, 144/Meter
Power: 9W/m (30LED/m), 18W/m(60LED/m),43.2W/m(144LED/m)
Grey scale: 256
Bits/color: 8-bits/color;total 24bit for RGB color
LED wavelengths: 630nm/530nm/475nm
Cuttable: every LED is cuttable
Finish (PCB color): white and black available
FPC width: 12mm (144leds/m type), 10mm (30leds/m and 60leds/m type)
Length: 5 meter reel for 30LED/m type, 5 meter reel for 60LED/m type, 1 m reel for 144LED/m type
Protection rate: Non-waterproof or IP67 waterproof (sealed in silicone tube)

Dual-signal wires version of the digital RGB strip, signal break-point continuous transmission. Any pixel’s failure won't affect signal transfer and total emitting effect.

The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal to reduce 24bit. Every pixel adopts auto-reshaping transmit technology, making the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal transmission.

Refresh Frequency updates to 2KHz, Low Frame Frequency and no Flicker appear in HD Video Camera. RESET time>280μs, it won’t cause wrong reset while interruption, it supports the lower frequency and inexpensive MCU.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account