90 Watt DMX 512 RGB LED Fiber Optic Light Source w/ remote
Two ways of control: RF remote and DMX-512 control;
Suitable for PPMA Optical Fiber, no over-heat at the common end of fiber.
Standard DMX512 input agreement, set up by DIP switch
0 to 100% Dimming output, 256 gray scale
16 kinds of test mode, and 16 levels changing speed
Max capacity of 1100pcs 0.75mm fiber
Direct connection to 85-265VAC through a 24 VDC power supply
28-key RF remoe control:static colorRed ,Green, Blue, Yellow, White, Pink, Ice blue) & fade, jump & Adjust the brightness or mode speed
- Buy 3 for $199.50 each and save 5%
- Buy 5 for $195.50 each and save 7%
- Buy 10 for $189.50 each and save 10%
Input: 85-265V AC
Light Source: RGB LED
Color: RGB
Grey Level: 256
Signal input DMX512/1990
DMX: 3 channel (RGB)
DMX connection: Standard 3-Pin XLR
Size: 10.9” x 7.7” x 3.1”
Ferrule Inner Diameter: 29mm
Remote: 28key RF remote control
Ferrule Inner Diameter: 29mm
Remote Size: 3.35” × 2” × .25”
LED Lifespan: 50,000 hours in ambient 25°C
Control: Remote and DMX
Attention please:
White color is mixed from RGB color, it would not very pure
airline now is forbidding shipping products with battery, we would have take the CR2025 battery out of RF remote;
How to Install Fiber to the Illuminator:
1. Align all the fiber head, fasten with tapes which have resistance temperature over 130 degrees centigrade.
2. Pass through the fiber to connector, fastening rotary tensioner. Make sure the fiber bunch could not move and each fibers must be in the same plane.
3. Cut the fiber bunch to flat surface by heat-knife or blade.
4. Make sure the fiber bunch head is smooth and clean, thus each fiber's light will be evenly.
5. Put through the whole fiber connector to fix ring of light engine. Fasten screw on the top of the fix ring.
Application Connection Diagram
DMX Control
RF Remote Control
